Isostatic Graphite

Home    Fine-Grained Graphite Blocks & Rounds    Isostatic Graphite
1-1Q0301453000-L

Isostatic Graphite

Formed by means of CIP (cold isostatic pressing) technique, isostatic graphite is characterized by its homogeneous structure and excellent isotropic electrical, thermal and mechanical properties. Sometimes it is purified in special-designed graphitization furnace to remove non-carbonaceous impurities. It is widely used in a variety of industrial and scientific engineerings as a structural and/or functional material.

 

Applications

Molds in continuous casting systems for making shaped steel, cast iron, copper;

Sintering molds for cemented carbides, diamond tools and electronic components;

Molds for making shaped glass;

Crucibles for melting precious metals or alloys;

Electrodes for EDM;

Heating elements, heat shields, crucibles, boats in furnaces for pulling monocrystalline silicon or optical fibers;

Anodes for production of manganese dioxide, metallic magnesium and rare metals;

And so on.

 

Programmable properties

Fine grain

Homogeneous structure

Isotropic properties

High density and high mechanical strength

High thermal and chemical resistance

High resistance to thermal shock

Proper electrical conductivity

High oxidation resistance

Low ash

 

Typical Sizes

Block

L x W x T  (Nominal, mm)

400x300x400, 490×400×400, 690x400x200, 650×600×300, 900x500x350, 1000x500x300, 1000x500x150,1200x500x150, 1200x500x300, 1200x500x400,1000x500x300, 1000x520x160, 1400x500x500, 1800x650x300

Round

Diameter x Thickness (Nominal, mm)

510×390, 510×500, 520x520, 560×510, 580×630, 600x600,

630×670, 650×650, 650×670, 680×670, 710×670, 900×400,

300x1000, 350x1000, 400x1000, 450x1000

* Other dimensions are available on request.

 

 Specifications

 

Specifcations

Unit 

Isostatic Graphite 

Bulk Density

g/cm3

1.8-1.88

Compressive Strength

MPa

70-95

Bending Strength 

MPa

35-55

Shore Hardness

 

45-65

C.T.E. (100~600℃)

×10-6/℃

3.8- 4.8

Specific Resistance

μ Ω·m

10.0-15.0

Ash(Normal Grade)

ppm

500-700

Maximum Grain Size

micron

8-25

 Note: The values mentioned in this table are only for reference and not committed to any contract.

 

Contact

  • Tel: +86-411-84357743
              +86-411-84335362
  •           +86-411-84335350
  •  Fax: +86-411-84342356
  •  Email: sales@duramaterials.com
                      info@duramaterials.com